RepeaterPhone1.1.9 - App Store
You'll be able to see results in few seconds.
Publisher Description
Note: This app is for licensed Amateur Radio operators only.
RepeaterPhone provides the ability to connect your mobile device to EchoLink or AllStarLink nodes, including repeaters and conferences. Push to talk today!
You will need an account with either the EchoLink or AllStarLink networks. Please see https://www.echolink.org or https://www.allstarlink.org, respectively, for more details
- Push-to-talk interface
- Browse or search the directory for available nodes
- Mark favorites with a star for quick access
- Supports various audio devices, including Bluetooth headsets
- Fully integrated into your phone's recent call system
- Includes a watch extension for dialing favorites and controlling push-to-talk
- Sharing your device with a licensed family member? Switch accounts easily
Version History - AllStarLink favorites should now properly refresh their connection settings from the directory unless they are edited
- Fixed: VoiceOver users could not switch directory listings if they were using more than one service
- Fixed: an asl:// deep link would fail if the directory was not loaded yet
- Added additional BLE PTT devices 1.1.9 6d ago - Fixed audio codec bug introduced by iOS 26.3 1.1.8 Jan 31 - Fixed issue with VoiceOver audio route after call ends
- Added 3 kHz clarity boost EQ to microphone audio 1.1.7 01/02/2025 Fixed crash due to concurrent callsign lookups 1.1.6 06/04/2024 Fixed an issue where switching between multiple AllStar accounts might retain the inactivated account's details. 1.1.5 02/19/2024 * Added support for Flic buttons as PTT
* Screen will no longer go to sleep during a call
* VoiceOver will no longer announce directory loading when directory is not on screen
* Fixed number pad for EchoLink manual node creation
* EchoLink will no longer have so much registration churn due to network path changes 1.1.4 09/10/2023 * Fixed crash due to malformed RTCP packet sent by SvxLink
* Added support for parsing EchoLink participant list in SvxLink format
* Now dismisses the keyboard when selecting an item from search results so that it does not obscure the screen, particularly the Connect button
* Attempting to catch and recover when Bluetooth causes an exeption when Voice Processing is on 1.0.6 10/29/2022 * Subsequent AllStarLink connection attempts now have the retransmitted flag set
* ASL calltokens will now only be requested once
* Certain error messages should have human readable messages instead of numbers
* Fixed a bug where manually adding an EchoLink node wouldn't accept a dash 1.0.5 10/26/2022 * Fixed an encoding issue with special characters in node-specific credentials
* Added an extra safeguard against VNAK storms on AllStar calls 1.0.4 10/19/2022 EchoLink link (-L) nodes seem to have a different station list format; can now parse this into the participants pane 1.0.3 10/17/2022 - Bugfix: Better handling of empty calltokens 1.0.2 10/13/2022 * Input gain setting is now remembered between calls
* Added RX courtesy tone option
* Added French localization
* Fix VoiceOver losing focus when EchoLink directory refreshes 1.0.1 10/11/2022 1.0 10/07/2022
About RepeaterPhone
The company that develops RepeaterPhone is Weston Bustraan. The latest version released by its developer is 1.1.9.
To install RepeaterPhone on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the RepeaterPhone as malware if the download link is broken.
How to install RepeaterPhone on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the RepeaterPhone is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After RepeaterPhone is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.1.9
posted on 2026-10-15
Version History - AllStarLink favorites should now properly refresh their connection settings from the directory unless they are edited
- Fixed: VoiceOver users could not switch directory listings if they were using more than one service
- Fixed: an asl:// deep link would fail if the directory was not loaded yet
- Added additional BLE PTT devices 1.1.9 6d ago - Fixed audio codec bug introduced by iOS 26.3 1.1.8 Jan 31 - Fixed issue with VoiceOver audio route after call ends
- Added 3 kHz clarity boost EQ to microphone audio 1.1.7 01/02/2025 Fixed crash due to concurrent callsign lookups 1.1.6 06/04/2024 Fixed an issue where switching between multiple AllStar accounts might retain the inactivated account's details. 1.1.5 02/19/2024 * Added support for Flic buttons as PTT
* Screen will no longer go to sleep during a call
* VoiceOver will no longer announce directory loading when directory is not on screen
* Fixed number pad for EchoLink manual node creation
* EchoLink will no longer have so much registration churn due to network path changes 1.1.4 09/10/2023 * Fixed crash due to malformed RTCP packet sent by SvxLink
* Added support for parsing EchoLink participant list in SvxLink format
* Now dismisses the keyboard when selecting an item from search results so that it does not obscure the screen, particularly the Connect button
* Attempting to catch and recover when Bluetooth causes an exeption when Voice Processing is on 1.0.6 10/29/2022 * Subsequent AllStarLink connection attempts now have the retransmitted flag set
* ASL calltokens will now only be requested once
* Certain error messages should have human readable messages instead of numbers
* Fixed a bug where manually adding an EchoLink node wouldn't accept a dash 1.0.5 10/26/2022 * Fixed an encoding issue with special characters in node-specific credentials
* Added an extra safeguard against VNAK storms on AllStar calls 1.0.4 10/19/2022 EchoLink link (-L) nodes seem to have a different station list format; can now parse this into the participants pane 1.0.3 10/17/2022 - Bugfix: Better handling of empty calltokens 1.0.2 10/13/2022 * Input gain setting is now remembered between calls
* Added RX courtesy tone option
* Added French localization
* Fix VoiceOver losing focus when EchoLink directory refreshes 1.0.1 10/11/2022 1.0 10/07/2022
version 1.1.8
posted on 2026-10-08
Version History - Fixed audio codec bug introduced by iOS 26.3 1.1.8 Jan 31 - Fixed issue with VoiceOver audio route after call ends
- Added 3 kHz clarity boost EQ to microphone audio 1.1.7 01/02/2025 Fixed crash due to concurrent callsign lookups 1.1.6 06/04/2024 Fixed an issue where switching between multiple AllStar accounts might retain the inactivated account's details. 1.1.5 02/19/2024 * Added support for Flic buttons as PTT
* Screen will no longer go to sleep during a call
* VoiceOver will no longer announce directory loading when directory is not on screen
* Fixed number pad for EchoLink manual node creation
* EchoLink will no longer have so much registration churn due to network path changes 1.1.4 09/10/2023 * Fixed crash due to malformed RTCP packet sent by SvxLink
* Added support for parsing EchoLink participant list in SvxLink format
* Now dismisses the keyboard when selecting an item from search results so that it does not obscure the screen, particularly the Connect button
* Attempting to catch and recover when Bluetooth causes an exeption when Voice Processing is on 1.0.6 10/29/2022 * Subsequent AllStarLink connection attempts now have the retransmitted flag set
* ASL calltokens will now only be requested once
* Certain error messages should have human readable messages instead of numbers
* Fixed a bug where manually adding an EchoLink node wouldn't accept a dash 1.0.5 10/26/2022 * Fixed an encoding issue with special characters in node-specific credentials
* Added an extra safeguard against VNAK storms on AllStar calls 1.0.4 10/19/2022 EchoLink link (-L) nodes seem to have a different station list format; can now parse this into the participants pane 1.0.3 10/17/2022 - Bugfix: Better handling of empty calltokens 1.0.2 10/13/2022 * Input gain setting is now remembered between calls
* Added RX courtesy tone option
* Added French localization
* Fix VoiceOver losing focus when EchoLink directory refreshes 1.0.1 10/11/2022 1.0 10/07/2022
version 1.1.8
posted on 2026-01-31
- Fixed audio codec bug introduced by iOS 26.3
version 1.1.7
posted on 2025-01-02
- Fixed issue with VoiceOver audio route after call ends
- Added 3 kHz clarity boost EQ to microphone audio
version 1.1.7
posted on 2025-01-02
Jan 2, 2025
Version 1.1.7
- Fixed issue with VoiceOver audio route after call ends
- Added 3 kHz clarity boost EQ to microphone audio
version 1.1.6
posted on 2024-06-04
Jun 4, 2024
Version 1.1.6
Fixed crash due to concurrent callsign lookups
version 1.1.5
posted on 2024-02-19
Feb 19, 2024
Version 1.1.5
Fixed an issue where switching between multiple AllStar accounts might retain the inactivated account's details.
version 1.1.4
posted on 2023-09-10
Sep 10, 2023
Version 1.1.4
* Added support for Flic buttons as PTT
* Screen will no longer go to sleep during a call
* VoiceOver will no longer announce directory loading when directory is not on screen
* Fixed number pad for EchoLink manual node creation
* EchoLink will no longer have so much registration churn due to network path changes
version 1.0.6
posted on 2022-10-29
Oct 29, 2022
Version 1.0.6
* Fixed crash due to malformed RTCP packet sent by SvxLink
* Added support for parsing EchoLink participant list in SvxLink format
* Now dismisses the keyboard when selecting an item from search results so that it does not obscure the screen, particularly the Connect button
* Attempting to catch and recover when Bluetooth causes an exeption when Voice Processing is on
Disclaimer
Official App Store Link
We do not host RepeaterPhone on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for RepeaterPhone is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
